top of page
CZP10C Magwell

Designed to fit CZ P10C Frames.


3D Printed from 20% Carbon Fiber reinforced Nylon. 


Made in Austin, Texas U.S.A 

CZP10C Magwell


    DOES NOT WORK WITH FACTORY BASEPLATES: Must use our baseplate on factory P10C magazines, found here.


    WORKS WITH: Shield Arms +5 extension


    UTG Pro Baseplates:  Requires some fitting.  You will either need to modify the front of the magwell or the front of the baseplates.  


    KILLER INNOVATIONS:  Although these work with our magwells, we've observed that their baseplate and extension allow for magazine over-insertion into the gun.  This can bend your ejector when doing a hard reload from slide lock.                        


    IDPAThe IDPA variants measure 1.350 wide allowing them to fit within the IDPA CCP compliance box (7 3/4" x 5 3/8" x 1 3/8").  


    This Magwell is designed to fit CZ P10C Frames. It is a single-piece design combining the backstrap with the magwell. 3D printed from 20% Carbon Fiber Reinforced Nylon. This magwell is incredibly light, weighing in at only 0.6 ounces, while still being surprisingly durable.


    Each magwell comes with 1 free baseplate included. if you want more than 3 baseplates, additional baseplates can be purchased here.


    Small, Medium and Large sizes are comparable to the Small, Medium and Large backstraps that come with the gun.  The SP profile is modeled after the CZ Shadow grip.  


    Please watch our video covering installation, removal, and more product details before buying. VIDEO

Check out all our installation videos on our VIDEOS page or on our YouTube channel.   

If you have any questions about the proper installation or fit of our products, do not hesitate to Contact Us.


bottom of page